Perfect for a huge range of calisthenics training moves and CrossFit, this rig will serve you well. Large enough to cater for several people training at once, it is ideal for instructors running a business as well as home calisthenics training and family fun.
At 2000mm long and 1500mm wide, the monkey bars are seriously heavyweight and built to test your strength and calisthenics moves.
This can be mounted at any height to suit but would typically be at 2500mm and is perfect for monkey bar, muscle up and ring training.
The sides are 44mm thick and will certainly test your grip strength if used for pull ups.
There are 6 rungs made from 33.7mm S355 steel at 333mm spacing, and the ladder sides are constructed from 44mm S355 steel.
The high bar can be mounted at 3000mm which gives plenty of room for full hangs and muscle ups. If you need more height for ring training an upgrade to 4000mm posts is recommended. The low bar is mounted on 2500mm posts, giving you plenty of choice for height.
Why not add a wing bar to the rig and test your ninja skills? Click here
All metalwork is zinc primed and powder coated in UV stable textured black RAL 9005, and manufactured to ISO 9001:2008 standards.
Consider using step up bars when installing longer posts. Click here
*At ExoFit we've taken the time to source the best possible materials, yet remain competitive.
*We work towards EN16630 standards (legacy BSI PAS888, DIN7900. All ExoFit equipment is free from sharp edges, crush points, entrapments and exposed stop ends.
*Our posts are made from premium kiln dried and laminated Larch and are much less prone to splitting or warping. They're supplied to us treated, before we fill any imperfections with an epoxy based filler. We then sand and paint them with 3 coats of UV stable Remmers lacquer to enhance their appearance and longevity.
*We don't install our posts in the ground. Instead we use heavy duty galvanised H post holders, meaning vastly prolonged life and easy dismantling of your gym should you need to move house.
*All our metal hardware is designed and manufactured using the latest CAD and laser cutting technologies. Everything is manufactured exclusively for ExoFit and we don't import cheap materials. Our bars are constructed from 33.7mm diameter British S355 steel and have 3 and 4mm wall thickness. Our end flanges are made from 8mm stainless steel for longevity.
*All our metal hardware zinc primed and is powder coated in UV stable textured black RAL 9005, and manufactured to ISO 9001:2008 standards.
*We use high quality fixings. Any butt joints are reinforced using M16 threaded bar set in resin, and Konstrux timber screws. All drill holes in the posts are treated with boron gel to deter rot.
*All our installations are modular and flexible in design. The bar height is up to you, but typically we recommend 2800mm, 2400mm, 1800mm and 1400mm.
*Where possible posts can be substituted for longer lengths to enable bars to be mounted higher. Bar length is also optional where designs allow. Any changes from the standard designs are subject to additional costs.
*We can also provide stainless steel post caps to extend the life of your installation.
*Play equipment can be added to many designs. Why not add a hammock for a post workout snooze?!
